INCOstartec GmbH | Panel PC

Panel PC ARM Powered

Panel PCs are made of a highly integrated CPU board - composed of single board computer (SBC) and a display. The CPU modules are fitted, based on the following computer technology:

X86 - in the range of 386, 5x86 up to Pentium
ARM - as a system on chip (SoC), in the power range of ARM7 / 9 to ARM11

The modules are designed as "open frame", available in a sandwich or in parts.
Embedded in cases they are found in "Industrial PCs" or "Mobile PCs".

PPC-BD035	PPC-BD056
PPC-BD064	PPC-9312
FEPPC-xx-xx	PPC-300
Terminal

All Panel PCs are in the selection of the CPU modules, as follows flexible scalable:

With the PPC-BD056 is a selection of the following AUX - Expansion modules available as follows:

912 = LILLY-912 / 200MHz RISC 32bit Processor
ARM®920T EP9312 Cirrus Logic

A11 = LILLY-1131 / 532MHz RISC 32bit Processor
ARM®1136 iMX 31 Freescale

A835 = LILLY-A835 / 0,6 up to 0,8 GHz
ARM®Cortex™ A8 OMAP-35XX Texas Instruments

A837 = LILLY-A837 / 1GHz
ARM® Cortex™ A8 DM/ AM37XX Texas Instruments

AUX - Expansion-modules D2 *
COM1 RS232 (D-SUB9), V IN (3,5 Cinch),
2x USB, Ethernet, signaler

AUX - Expansion-modules D3
COM2 RS232/RS485 (D-SUB9), V IN(3,5 Cinch),
2x USB, Ethernet. Internal Interfaces:
COM1 TTL 2 x 5 PIN, Audio I/O 2 x 5 PIN,
8x GPIO 2 x 5 PIN, I²C-Bus 1 x 5 PIN

AUX - Expansion-modules D4
COM2 RS232 / CAN-BUS (D-SUB9), V IN (3,5 Cinch),
2x USB, Ethernet, signaler,
Controller for ON/OFF Button.

*Standard